If the OAD/OZD increases by 0.8 mm, by how many diopters should the base curve be flattened to maintain the same fit?

Study for the NBEO Physiological Optics Test. Prepare with flashcards and multiple-choice questions, each question has hints and explanations. Ace your exam!

Multiple Choice

If the OAD/OZD increases by 0.8 mm, by how many diopters should the base curve be flattened to maintain the same fit?

Explanation:
When the OAD/OZD increases, the lens edge sits on a longer arc, which tends to loosen the fit unless the base curve is adjusted. A practical rule of thumb is that for every 0.4 mm increase in OAD/OZD, flattening the base curve by about 0.25 diopters is needed. With an increase of 0.8 mm, you apply this twice: 0.8/0.4 = 2 steps × 0.25 D = 0.50 D. Flattening the base curve means reducing its curvature (increasing the radius), so the lens maintains similar contact with the eye. Therefore, about 0.50 diopters is the appropriate adjustment.

When the OAD/OZD increases, the lens edge sits on a longer arc, which tends to loosen the fit unless the base curve is adjusted. A practical rule of thumb is that for every 0.4 mm increase in OAD/OZD, flattening the base curve by about 0.25 diopters is needed. With an increase of 0.8 mm, you apply this twice: 0.8/0.4 = 2 steps × 0.25 D = 0.50 D. Flattening the base curve means reducing its curvature (increasing the radius), so the lens maintains similar contact with the eye. Therefore, about 0.50 diopters is the appropriate adjustment.

More Multiple Choice Questions
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy